ZyXEL EOC350-TA User Guide - Page 27
The IGMP Screen
View all ZyXEL EOC350-TA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Chapter 5 EP Management Figure 15 Management > Ether > Config > QoS (termination system) The following table describes the items in this screen. Table 14 Management > Ether > Config > QoS (termination system) LABEL DESCRIPTION Priority base on Queue Scheduling Select 802.1p to configure the IEEE 802.1p prioritization scheme for incoming frames. Select IP TOS/TC or DSCP to configure the IP prioritization scheme. Select Strict Priority to forward packets in the higher priority queues first (Q0 has the lowest priority). Packets in the lower priority queues will be forwarded after the higher priority queues are empty. Select Weight fair Queue to forward 8 packets from Q3, then 4 packets from Q2, then 2 packets from Q1, and then 1 packet from Q0. Select Mix mode to use strict priority to forward packets from Q3 first, and weighted fair queuing to forward packets from Q2, Q1, and Q0. Port Type a TCP/UDP port number to prioritize traffic for important applications. Queue Apply Back Select a queue for this port. Click Apply to save your settings. Click Back to return to the previous screen. 5.5.4 The IGMP Screen Use this screen to enable IGMP v1/2 fast leave on the termination system's interfaces. Click EP Management > Ether > Config > IGMP on the local termination system device to show the following screen. Figure 16 EP Management > Ether > Config > IGMP (termination system) EOC350 Series User's Guide 27