ZyXEL EOC350-TA User Guide - Page 34
The Filter Screen
View all ZyXEL EOC350-TA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Chapter 5 EP Management Figure 25 EP Management > Ether > Config > VLAN (profile) The following table describes the items in this screen. Table 22 EP Management > Ether > Config > VLAN (profile) LABEL DESCRIPTION Tag V LAN Select Enable to enable VLAN tagging. Port This shows the port name for this row. Priority Select the 802.1Q priority applied to incoming frames. VID In Rule Out Rule Apply Back Select the 802.1Q VLAN ID applied to incoming frames. Select Accept All to forward all incoming frames regardless of VID. Select VID Matched to forward only the incoming frames that match the port VID. Select Tag to add an 802.1Q tag to egress frames. Select Untag to remove the 802.1Q tag from egress frames. Select Bypass to leave the tag of the frame alone. Click Apply to save your settings. Click Back to return to the previous screen. 5.7.6 The Filter Screen Use this screen to configure the hosts that are allowed to send and receive traffic via the termination adapter's interfaces. Click EP Management > Ether > Config > Filter on the default profile to show the following screen. Figure 26 EP Management > Ether > Config > Filter (profile) 34 EOC350 Series User's Guide