ZyXEL EOC350-TA User Guide - Page 38
Table 27, LABEL, DESCRIPTION, Table 28
View all ZyXEL EOC350-TA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Chapter 5 EP Management Figure 30 EP Management > Ether > Config > IGMP (termination adapter) The following table describes the items in this screen. Table 27 EP Management > Ether > Config > IGMP (termination adapter) LABEL DESCRIPTION IGMP Snooping Select Enable to enable IGMP v1/2 fast leave. Select Disable if only IGMP v3 is implemented on the network. Apply Back Click Apply to save your settings. Click Back to return to the main EP Management screen. 5.8.5 The VLAN Screen Use this screen to configure VLAN tagging on the termination adapter's interfaces. Click EP Management > Ether > Config > VLAN on the termination adapter to show the following screen. Figure 31 EP Management > Ether > Config > VLAN (termination adapter) The following table describes the items in this screen. Table 28 EP Management > Ether > Config > VLAN (termination adapter) LABEL DESCRIPTION Tag V LAN Select Enable to enable VLAN tagging. Port This shows the port name for this row. Priority Select the 802.1Q priority applied to incoming frames. VID In Rule Out Rule Select the 802.1Q VLAN ID applied to incoming frames. Select Accept All to forward all incoming frames regardless of VID. Select VID Matched to forward only the incoming frames that match the port VID. Select Tag to add an 802.1Q tag to egress frames. Select Untag to remove the 802.1Q tag from egress frames. Select Bypass to leave the tag of the frame alone. 38 EOC350 Series User's Guide