ZyXEL EOC350-TS User Guide - Page 62
Generic Command Sets
View all ZyXEL EOC350-TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Chapter 11 Telnet Table 49 Common Telnet Parameters (continued) PARAMETER DESCRIPTION Network interface name. E.g. 'eth0' for LAN1/LAN2 interface, 'eoc0' for EoC interface. The flash ROM file id represents different firmware/driver types, 'n', where n=0~12'. • n=0: System bootcode (termination system bootloader) • n=1: System firmware (termination system OS) • n=2: Termination system EoC driver • n=3: termination adapter EoC driver • n=10: termination adapter diagnosis utility Only lowercase letters are accepted. Type a command followed by ENTER to execute the command. 11.2.1.1 EP Default Profile Run EP commands with the '-m default' parameter to apply settings to the EP Default Profile. This parameter is not applicable to the 'diag', 'epreg', 'eprestore', 'epstat', 'rmep', 'showep', 'snr', and 'upep' EP commands. 11.2.2 Generic Command Sets This table describes the generic commands available via the telnet console. Table 50 Generic Telnet Commands COMMANDS ARGUMENTS [ ] IS OPTIONAL autocfg [-t ] [-s ] [-p ] dconfig default dhcpsnoop diag -t -r -m DESCRIPTION Setup auto configuration by TFTP. • -t: on (enable) / off (disable) auto configuration mode • -s: TFTP server IP address or host name • -p: directory path resides at TFTP server Dump all configurations/settings. Reset all settings to factory default, including passwords. Setup DHCP snooping. • -m 0: disable (default) • 1: enable dhcp option 82 • 2: enable dhcp option 82 and snooping Run a termination adapter connection diagnostics. This stops all service for 10~20 seconds. We recommend running the Online Diag command 'snr' first. • -t: downstream diagnosis (from termination system to termination adapter) • -r: upstream diagnosis (from termination adapter to termination system) • -m : termination adapter EoC MAC to be diagnosed 62 EOC350 Series User's Guide