ZyXEL EX5510-B0 User Guide - Page 142
Add/Edit Policy Route
View all ZyXEL EX5510-B0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
Chapter 9 Routing 9.4.1 Add/Edit Policy Route Click Add New Policy Route in the Policy Route screen or click the Edit icon next to a policy. Use this screen to configure the required information for a policy route. Figure 82 Policy Route: Add/Edit The following table describes the labels in this screen. Table 43 Policy Route: Add/Edit LABEL DESCRIPTION Active Click this switch to enable or disable the policy route. When the switch goes to the right function is enabled. Otherwise, it is not. , the Route Name Enter a descriptive name of up to 8 printable English keyboard characters, not including spaces. Source IP Address Enter the source IP address. Source Subnet Mask Enter the source subnet mask address. Protocol Select the transport layer protocol (TCP or UDP). Source Port Enter the source port number. Source MAC Enter the source MAC address. Source Interface Type the name of the interface from which the matched traffic is sent. (ex: br0 or LAN1~LAN4) WAN Interface This field shows ETHWAN as the WAN interface through which the traffic is sent. EX5510-B0 User's Guide 142