ZyXEL EX5510-B0 User Guide - Page 169
LABEL, DESCRIPTION, Obtain WAN IP Automatically
View all ZyXEL EX5510-B0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 169 highlights
Chapter 11 Network Address Translation (NAT) Figure 96 Port Forwarding: Add/Edit The following table describes the labels in this screen. Table 58 Port Forwarding: Add/Edit LABEL DESCRIPTION Active Service Name Obtain WAN IP Automatically WAN IP WAN Interface Click this switch to enable or disable the rule. When the switch goes to the right function is enabled. Otherwise, it is not. , the Enter a name to identify this rule using keyboard characters (A-Z, a-z, 1-2 and so on). Select the Enable check box to have the Zyxel Device automatically detect and use an available WAN interface for port forwarding. Enter your WAN IP address in this field if you did not select Obtain WAN IP Automatically. Select the WAN interface through which the service is forwarded. You must have already configured a WAN connection with NAT enabled. Note: This field is not available if you enable Obtain WAN IP Automatically. EX5510-B0 User's Guide 169