ZyXEL EX5510-B0 User Guide - Page 250
Get Community, Set Community, Trap Community, Cancel, Apply
View all ZyXEL EX5510-B0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 250 highlights
Chapter 30 SNMP The following table describes the fields in this screen. Table 113 Maintenance > SNMP LABEL DESCRIPTION SNMP Agent Enable this switch to let the Zyxel Device act as an SNMP agent, which allows a manager station to manage and monitor the Zyxel Device through the network, Click on this switch to enable/disable it. When the switch goes to the right , the function is enabled. Get Community Enter the Get Community, which is the password for the incoming Get and GetNext requests from the management station. Set Community Enter the Set Community, which is the password for the incoming Set requests from the management station. Trap Community Enter the Trap Community, which is the password sent with each trap to the SNMP manager. The default is public and allows all requests. System Name Enter the SNMP system name. System Location Enter the SNMP system location. System Contact Enter the SNMP system contact. Trap Destination Type the IP address of the station to send your SNMP traps to. Cancel Click Cancel to restore the default or previously saved settings. Apply Click Apply to save your changes back to the Zyxel Device. EX5510-B0 User's Guide 250