ZyXEL EX5510-B0 User Guide - Page 97
Network Setting > Wireless > WPS, Apply, LABEL, DESCRIPTION
View all ZyXEL EX5510-B0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Chapter 7 Wireless Click Network Setting > Wireless > WPS. The following screen displays. Click this switch and makes it turn blue. Click Apply to activate the WPS function. Then you can configure the WPS settings in this screen. Figure 54 Network Setting > Wireless > WPS The following table describes the labels in this screen. Table 25 Network Setting > Wireless > WPS LABEL DESCRIPTION General WPS Click this switch to activate or deactivate WPS on this Zyxel Device. When the switch turns blue , the function is enabled. Otherwise, it is not. Add a new device with WPS Method Method 1 Use this section to set up a WPS wireless network using Push Button Configuration (PBC). Click this switch to make it turn blue. Click Apply to activate WPS method 1 on the Zyxel Device. WPS Click this button to add another WPS-enabled wireless device (within wireless range of the Zyxel Device) to your wireless network. This button may either be a physical button on the outside of device, or a menu button similar to the WPS button on this screen. Method 2 Note: You must press the other wireless device's WPS button within two minutes of pressing this button. Use this section to set up a WPS wireless network by entering the PIN of the client into the Zyxel Device. Click this switch and make it turn blue. Click Apply to activate WPS method 2 on the Zyxel Device. EX5510-B0 User's Guide 97