ZyXEL EX5510-B0 User Guide - Page 211

Chapter 18 Parental Control Figure 130 Security > Parental Control > Add/Edit PCP (Network Service & Site/URL Keyword) The following table describes the fields in this screen. Table 85 Security > Parental Control >Add/Edit PCP LABEL DESCRIPTION General Active Select Enable or Disable to activate or deactivate the parental control rule. Parental Control Enter a descriptive name for the rule. Profile Name Home Network Select the LAN user that you want to apply this rule to from the drop-down list box. If you select User Custom, enter the LAN user's MAC address. If you select All, the rule applies to all LAN users. Rule List In Home Network User, select Custom, enter the LAN user's MAC address, then click the Add icon to enter a computer MAC address for this PCP. Up to five are allowed. Click the Delete icon to remove one. Internet Access Schedule Day Select check boxes for the days that you want the Zyxel Device to perform parental control. Time Drag the time bar to define the time that the LAN user is allowed access (Authorized access) or denied access (No access). Add New Service Click this to add a new time bar. Up to three are allowed. Network Service Network Service If you select Block, the Zyxel Device prohibits the users from viewing the web sites with the URLs Setting listed below. Add New Service # If you select Allow, the Zyxel Device blocks access to all URLs except ones listed below. Click this to show a screen in which you can add a new service rule. You can configure the Service Name, Protocol, and Port of the new rule, as shown in Figure 132. This shows the index number of the rule. EX5510-B0 User's Guide 211