ZyXEL EX5510-B0 User Guide - Page 95
MAC Authentication
View all ZyXEL EX5510-B0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Chapter 7 Wireless 7.4 MAC Authentication This screen allows you to configure the Zyxel Device to give exclusive access to specific devices (Allow) or exclude specific devices from accessing the Zyxel Device (Deny) based on the device(s) MAC address. Every Ethernet device has a unique MAC (Media Access Control) address. It is assigned at the factory and consists of six pairs of hexadecimal characters; for example, 00:A0:C5:00:00:02. You need to know the MAC addresses of the device(s) you want to allow/deny to configure this screen. Note: You can have up to 25 MAC authentication rules. Use this screen to view your Zyxel Device's MAC filter settings and add new MAC filter rules. Click Network Setting > Wireless > MAC Authentication. The screen appears as shown. Figure 52 Network Setting> Wireless > MAC Authentication The following table describes the labels in this screen. Table 24 Network Setting > Wireless > MAC Authentication LABEL DESCRIPTION General SSID MAC Restrict Mode Select the SSID for which you want to configure MAC filter settings. Define the filter action for the list of MAC addresses in the MAC Address table. Select Disable to turn off MAC filtering. Select Deny to block access to the Zyxel Device. MAC addresses not listed will be allowed to access the Zyxel Device. Select Allow to permit access to the Zyxel Device. MAC addresses not listed will be denied access to the Zyxel Device. MAC Address List EX5510-B0 User's Guide 95