ZyXEL G-162 User Guide - Page 29
Security Settings, Wireless LAN Security
View all ZyXEL G-162 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
ZyXEL G-162 User's Guide Chapter 4 Security Settings This chapter discusses how to configure wireless security on the G-162. 4.1 Wireless LAN Security Wireless LAN security is vital to protect wireless communications. The figure below shows the possible wireless security levels on your G-162. EAP (Extensible Authentication Protocol) is used for authentication and utilizes dynamic WEP key exchange. It requires interaction with a RADIUS (Remote Authentication Dial-In User Service) server either on the WAN or your LAN to provide authentication service for wireless clients. Table 4-1 Wireless LAN Security Levels SECURITY LEVEL SECURITY TYPE Least Secure Unique SSID (Default) Unique SSID with SSID Hidden MAC Address Filtering WEP Encryption IEEE802.1x EAP with RADIUS Server Authentication Most Secure Wi-Fi Protected Access (WPA) WPA2 (IEEE 802.11i) Configure the wireless LAN security using the Profile Security Settings screen. If you do not enable any wireless security on your G-162, the G-162's wireless communications are accessible to any wireless networking device that is in the coverage area. 4.1.1 Data Encryption with WEP WEP (Wired Equivalent Privacy) encryption scrambles all data packets transmitted between the G-162 and the AP or other peer wireless device to keep them private. Both the wireless clients and the access points must use the same WEP key for data encryption and decryption. There are two ways to create WEP keys in your G-162. • Automatic WEP key generation based on a "password phrase" called a passphrase. The passphrase is case sensitive. You must use the same passphrase for all WLAN adapters with this feature in the same WLAN. Security Settings 4-1