ZyXEL GS1920 Series User Guide - Page 312
Table 155, LABEL, DESCRIPTION, Table 156
View all ZyXEL GS1920 Series manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 312 highlights
Chapter 38 Access Control The following table describes the labels in this screen. Table 155 Management > Access Control > SNMP > Trap Group > Port LABEL Option Port * DESCRIPTION Select the trap type you want to configure here. This field displays a port number. Settings in this row apply to all ports. Use this row only if you want to make some of the settings the same for all ports. Use this row first to set the common settings and then make adjustments on a port-by-port basis. Active Changes in this row are copied to all the ports as soon as you make them. Select this check box to enable the trap type of SNMP traps on this port. Apply Cancel Clear this check box to disable the sending of SNMP traps on this port. Click Apply to save your changes to the Switch's run-time memory. The Switch loses these changes if it is turned off or loses power, so use the Save link on the top navigation panel to save your changes to the non-volatile memory when you are done configuring. Click Cancel to begin configuring this screen afresh. 38.3.3 Configuring SNMP User From the SNMP screen, click User to view the screen as shown. Use the User screen to create SNMP users for authentication with managers using SNMP v3 and associate them to SNMP groups. An SNMP user is an SNMP manager. Figure 230 Management > Access Control > SNMP > User The following table describes the labels in this screen. Table 156 Management > Access Control > SNMP > User LABEL DESCRIPTION User Information Note: Use the username and password of the login accounts you specify in this screen to create accounts on the SNMP v3 manager. Username Specify the username of a login account on the Switch. GS1920 Series User's Guide 312