ZyXEL GS1920 Series User Guide - Page 341

Chapter 43 ARP Table Figure 253 Management > ARP Table The following table describes the labels in this screen. Table 171 Management > ARP Table LABEL Condition DESCRIPTION Specify how you want the Switch to remove ARP entries when you click Flush. Select All to remove all of the dynamic entries from the ARP table. Select IP Address and enter an IP address to remove the dynamic entries learned with the specified IP address. Flush Cancel Index IP Address MAC Address VID Port Age(s) Type Select Port and enter a port number to remove the dynamic entries learned on the specified port. Click Flush to remove the ARP entries according to the condition you specified. Click Cancel to return the fields to the factory defaults. This is the ARP table entry number. This is the IP address of a device connected to a Switch port with the corresponding MAC address below. This is the MAC address of the device with the corresponding IP address above. This field displays the VLAN to which the device belongs. This field displays the port to which the device connects. CPU means this IP address is the Switch's management IP address. This field displays how long (in seconds) an entry can still remain in the ARP table before it ages out and needs to be relearned. This shows 0 for a static entry. This shows whether the IP address is dynamic (learned by the Switch) or static (manually configured in the Basic Setting > IP Setup or IP Application > ARP Setup > Static ARP screen). GS1920 Series User's Guide 341