ZyXEL MAX218M2W User Guide - Page 55
ZyXEL MAX218M2W Manual
View all ZyXEL MAX218M2W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Chapter 4 Tutorials Note: You will need to configure the VLAN supporting switches to tag the received packets with the appropriate VLAN IDs. For example, packets received on switch S1 from PC A on the LAN would be tagged to VLAN 5. Figure 18 VLAN Configuration Example 3 C VLAN TagID = 5 VLAN TagID = 5 No VLAN Tag A No VLAN Tag S1VLAN TagID = 5 S2 No VLAN Tag E VLAN TagID = 3 B VLAN TagID = 10 VLAN TagID = 3 No VLAN Tag VLAN TagID = 10 VLAN TagID = 10 No VLAN Tag D Manager IP: Enable VLAN LAN: Transparent Note: Manager IP VLAN ID is different from the LAN transparent VLAN ID User Network VLAN Tag ID=5 Transparent VLAN Tag ID=10 LAN CPE VLAN Tag ID=5 VLAN Tag ID=10 Network operators Router Manager IP VLAN Tag ID=3 VLAN Tag ID=3 1 Configure the Link Type, PVID and Tag/Untag settings for the interfaces as below by clicking each row. Then press OK. WiMAX Device Configuration User's Guide 55