ZyXEL MAX218M2W User Guide - Page 96
Pppoe, Table 26, Label, Description
View all ZyXEL MAX218M2W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Chapter 7 Network Setting Table 26 WAN (continued) LABEL DESCRIPTION WAN IP Request Timeout Enter the number of seconds the WiMAX Device waits for an IP from the ISP before it times out. WAN IP Address If the WiMAX Device gets its IP from the user, enter the IP address it is to use. WAN IP Subnet Mask If the WiMAX Device gets its IP from the ISP, enter the IP address it is to use. Gateway IP Address If the WiMAX Device gets its gateway IP address from the user, enter the IP address it is to use. MTU Enter the Maximum Transmission Unit (MTU) for the WiMAX Device. This is the largest protocol unit that the WiMAX Device allows to pass through it. Clone MAC Address Enter a MAC address here for registering bridged devices on the network if their current MAC addresses are causing problems. For example, this can happen when a desktop computer swaps network interface cards; the original NIC may have used its MAC address to register itself on the network and now the new NIC is unrecognized. Using a MAC address that you know is valid, i.e. a "clone", allows that device to stay registered. WAN DNS First~Third DNS Server Select how the WiMAX Device acquires its DNS server address. • From ISP - Select this to have the WiMAX Device acquire its DNS server address from the ISP. • User Define - Select this to manually enter the DNS server used by the WiMAX Device. 7.3 PPPoE Use these settings to configure the PPPoE connection between the WiMAX Device and the service provider. Click Network Setting > WAN > PPPoE. Figure 44 PPPoE Screen 96 WiMAX Device Configuration User's Guide