ZyXEL MES-3728 User Guide - Page 124
Advanced Application > Filtering, continued
View all ZyXEL MES-3728 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
Chapter 12 Filtering Table 23 Advanced Application > Filtering (continued) LABEL DESCRIPTION Action Select Discard source to drop the frames from the source MAC address (specified in the MAC field). The Switch can still send frames to the MAC address. Select Discard destination to drop the frames to the destination MAC address (specified in the MAC address). The Switch can still receive frames originating from the MAC address. MAC VID Add Cancel Clear Index Active Name MAC Address VID Delete Cancel Select Discard source and Discard destination to block traffic to/from the MAC address specified in the MAC field. Type a MAC address in valid MAC address format, that is, six hexadecimal character pairs. Type the VLAN group identification number. Click Add to save your changes to the Switch's run-time memory. The Switch loses these changes if it is turned off or loses power, so use the Save link on the top navigation panel to save your changes to the non-volatile memory when you are done configuring. Click Cancel to reset the fields to your previous configuration. Click Clear to clear the fields to the factory defaults. This field displays the index number of the rule. Click an index number to change the settings. This field displays Yes when the rule is activated and No when is it deactivated. This field displays the descriptive name for this rule. This is for identification purpose only. This field displays the source/destination MAC address with the VLAN identification number to which the MAC address belongs. This field displays the VLAN group identification number. Check the rule(s) that you want to remove in the Delete column and then click the Delete button. Click Cancel to clear the selected checkbox(es) in the Delete column. 124 MES-3728 User's Guide