ZyXEL MES-3728 User Guide - Page 360

Chapter 42 Product Specifications Table 124 Hardware Specifications LEDs Per switch: BPS, PWR, SYS, ALM Per Fast Ethernet RJ-45 10/100 port: LNK/ACT Per mini-GBIC slot: LNK, ACT Per 1000BASE-T RJ-45 port (in dual personality interface): LNK/ ACT, FDX Operating Environment Storage Environment Per Management port: 10, 100 Temperature: 0ºC ~ 65ºC (32ºF ~ 149ºF) Humidity: 10 ~ 90% (non-condensing) Temperature: -10º C ~ 70º C (14º F ~ 158º F) Ground Wire Gauge Power Wire Gauge Fuse Specification External Signal Jack External Signal connector Humidity: 10 ~ 90% (non-condensing) 18 AWG or larger 18 AWG or larger 250 VAC, T2A Supports input from four external alarms or other devices and output to one device. • Input: connect any one of the input pin pairs (4,5) (6,7) (8,9) (10,11) to a normally open (NO) dry contact device without any external input power. An alarm is triggered when the circuit is closed. • Output: dry contact (support 20 VDC, 500mA only), connect the output pin pair (1,2) to a device in Normal Close (NO) operation and/or pin pair (2,3) to a device in Normal Open (NO) operation. Standard Wire Gauge: 20 ~ 28 AWG Wire strip length: 6 ~7 mm Table 125 Firmware Specifications FEATURE DESCRIPTION Default IP Address In band: 192.168.1.1 Default Subnet Mask Administrator User Name Default Password Number of Login Accounts Configurable on the Switch Maximum Frame Size Out of band (Management port): 192.168.0.1 255.255.255.0 (24 bits) admin 1234 4 management accounts configured on the Switch. Authentication via RADIUS and TACACS+ also available. 9 K (9216 bytes) 360 MES-3728 User's Guide