ZyXEL MES-3728 User Guide - Page 148
Bandwidth Control Setup
View all ZyXEL MES-3728 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 148 highlights
Chapter 14 Bandwidth Control 14.2 Bandwidth Control Setup Click Advanced Application > Bandwidth Control in the navigation panel to bring up the screen as shown next. Figure 77 Advanced Application > Bandwidth Control 148 The following table describes the related labels in this screen. Table 33 Advanced Application > Bandwidth Control LABEL DESCRIPTION Active Select this check box to enable bandwidth control on the Switch. Port This field displays the port number. * Settings in this row apply to all ports. Use this row only if you want to make some settings the same for all ports. Use this row first to set the common settings and then make adjustments on a port-by-port basis. Ingress Rate Active Commit Rate Active Peak Rate Note: Changes in this row are copied to all the ports as soon as you make them. Select this check box to activate commit rate limits on this port. Specify the guaranteed bandwidth allowed in kilobits per second (Kbps) for the incoming traffic flow on a port. The commit rate should be less than the peak rate. The sum of commit rates cannot be greater than or equal to the uplink bandwidth. Select this check box to activate peak rate limits on this port. Specify the maximum bandwidth allowed in kilobits per second (Kbps) for the incoming traffic flow on a port. MES-3728 User's Guide