ZyXEL MES-3728 User Guide - Page 89
Basic Setting > IP Setup, continued
View all ZyXEL MES-3728 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Chapter 8 Basic Setting Table 11 Basic Setting > IP Setup (continued) LABEL DESCRIPTION Apply Click Apply to save your changes to the Switch's run-time memory. The Switch loses these changes if it is turned off or loses power, so use the Save link on the top navigation panel to save your changes to the non-volatile memory when you are done configuring. Cancel Click Cancel to begin configuring the fields again. In-band IP Addresses You can create up to 64 IP addresses, which are used to access and manage the Switch from the ports belonging to the pre-defined VLAN(s). You must configure a VLAN first. IP Address Enter the IP address for managing the Switch by the members of the VLAN specified in the VID field below. IP Subnet Mask Enter the IP subnet mask in dotted decimal notation. VID Type the VLAN group identification number. Default Gateway Enter the IP address of the default outgoing gateway in dotted decimal notation. Add Click Add to insert the entry to the summary table below and save your changes to the Switch's run-time memory. The Switch loses these changes if it is turned off or loses power, so use the Save link on the top navigation panel to save your changes to the non-volatile memory when you are done configuring. Cancel Click Cancel to reset the fields to your previous configuration. Index This field displays the index number of the rule. Click an index number to edit the rule. IP Address This field displays the IP address. IP Subnet Mask This field displays the subnet mask. VID This field displays the ID number of the VLAN group. Default Gateway This field displays the IP address of the default gateway. Delete Check the management IP addresses that you want to remove in the Delete column, then click the Delete button. Cancel Click Cancel to clear the selected check boxes in the Delete column. MES-3728 User's Guide 89