ZyXEL MES-3728 User Guide - Page 303

Chapter 33 Maintenance 33.8.2 FTP Command Line Procedure 1 Launch the FTP client on your computer. 2 Enter open, followed by a space and the IP address of your Switch. 3 Press [ENTER] when prompted for a username. 4 Enter your password as requested (the default is "1234"). 5 Enter bin to set transfer mode to binary. 6 Use put to transfer files from the computer to the Switch, for example, put firmware.bin ras-0 transfers the firmware on your computer (firmware.bin) to the Switch and renames it to "ras-0". Similarly, put config.cfg config transfers the configuration file on your computer (config.cfg) to the Switch and renames it to "config". Likewise get config config.cfg transfers the configuration file on the Switch to your computer and renames it to "config.cfg". See Table 100 on page 302 for more information on filename conventions. 7 Enter quit to exit the ftp prompt. 33.8.3 GUI-based FTP Clients The following table describes some of the commands that you may see in GUIbased FTP clients. General Commands for GUI-based FTP Clients COMMAND DESCRIPTION Host Address Enter the address of the host server. Login Type Anonymous. This is when a user I.D. and password is automatically supplied to the server for anonymous access. Anonymous logins will work only if your ISP or service administrator has enabled this option. Normal. Transfer Type Initial Remote Directory Initial Local Directory The server requires a unique User ID and Password to login. Transfer files in either ASCII (plain text format) or in binary mode. Configuration and firmware files should be transferred in binary mode. Specify the default remote directory (path). Specify the default local directory (path). MES-3728 User's Guide 303