ZyXEL MES-3728 User Guide - Page 267
Configuring VLAN Mapping
View all ZyXEL MES-3728 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 267 highlights
Chapter 28 VLAN Mapping 28.3 Configuring VLAN Mapping Click the VLAN Mapping Configure link in the VLAN Mapping screen to display the screen as shown. Use this screen to enable and edit the VLAN mapping rule(s). Figure 141 VLAN Mapping Configuration The following table describes the labels in this screen. Table 88 VLAN Mapping Configuration LABEL DESCRIPTION Active Check this box to activate this rule. Name Enter a descriptive name (up to 32 printable ASCII characters) for identification purposes. Port Type a port to be included in this rule. VID Enter a VLAN ID from 1 to 4094. This is the VLAN tag carried in the packets and will be translated into the VID you specified in the Translated VID field. Translated VID Enter a VLAN ID (from 1 to 4094) into which the customer VID carried in the packets will be translated. Priority Select a priority level (from 0 to 7). This is the priority level that replaces the customer priority level in the tagged packets or adds to the untagged packets. Add Click Add to insert the entry in the summary table below and save your changes to the Switch's run-time memory. The Switch loses these changes if it is turned off or loses power, so use the Save link on the top navigation panel to save your changes to the non-volatile memory when you are done configuring. Cancel Click Cancel to reset the fields to your previous configuration. Index This is the number of the VLAN mapping entry in the table. MES-3728 User's Guide 267