ZyXEL NAS520 User Guide - Page 108
Configuring Network Interface
View all ZyXEL NAS520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
Chapter 10 Control Panel The following table describes the labels in this screen Table 39 Control Panel > Network > TCP/IP > General Settings LABEL DESCRIPTION Default Gateway Select the LAN interface to use as the default gateway. DNS Server DNS (Domain Name System) is for mapping a domain name to its corresponding IP address and vice versa. If you have the IP address(es) of the DNS server(s), enter them. Automatically Select the option to have the NAS get a DNS server address automatically. Manually Select this option to choose a static DNS server address. Type the DNS server IP address(es) into the fields below. Primary DNS Server Type a primary DNS server IP address. Secondary DNS Server Type a secondary DNS server IP address. Apply Click this to save your TCP/IP configurations. After you click Apply, the NAS restarts. Wait until you see the Login screen or until the NAS fully boots and then use the NAS Starter Utility to rediscover it. Reset Click this to restore your previously saved settings. 10.4.2 Configuring Network Interface Use the Network Interface screen to edit the IPv4 or IPv6 settings of LAN 1 and LAN 2, set up port trunking, and configure PPPoE settings. Click Control Panel > Network > TCP/IP > Network Interface in the navigation panel to open the following screen. Figure 61 Control Panel > Network > TCP/IP > Network Interface Cloud Storage User's Guide 108