ZyXEL NAS520 User Guide - Page 93
Map iSCSI LUNs
View all ZyXEL NAS520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Chapter 8 Storage Manager Table 26 iSCSI Targets > Edit > Properties (continued) LABEL CHAP DESCRIPTION Username - The user name is for the initiator to authenticate the initiator when attempting connection. Password - The password is for the target to authenticate the initiator when attempting connection. Confirm password - Re-type the password to make sure you entered it correctly. Enable mutual CHAP Note: Valid characters for password are 0-9, a-z, and A-Z, and the valid length is 12-14 characters. Select this check box to perform mutual CHAP on the target. Username - The user name is for the target to authenticate the initiator when attempting connection. Password - The password is for the target to authenticate the initiator when attempting connection. Confirm password - Re-type the password to make sure you entered it correctly. Apply Cancel Note: Valid characters for password are 0-9, a-z, and A-Z, and the valid length is 12-14 characters. Click Apply to save your changes. Click Cancel to close the screen without saving any settings. Map iSCSI LUNs If the existing iSCSI target doesn't map to any iSCSI LUN, go to Map iSCSI LUNs to configure the mapping. Figure 54 iSCSI Targets > Edit > Map iSCSI LUNs Cloud Storage User's Guide 93