ZyXEL NBG4604 User Guide - Page 109
LAN IP Screen
View all ZyXEL NBG4604 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Chapter 8 LAN 8.4 LAN IP Screen Use this screen to change your basic LAN settings. Click Network > LAN. Figure 67 Network > LAN > IP The following table describes the labels in this screen. Table 43 Network > LAN > IP LABEL Get from DHCP Server DESCRIPTION Select this to have your NBG4604 receive its IP address automatically from a DHCP server. User Defined LAN Select this to manually enter the IP address and Subnet Mask as they IP were provided to you by your network administrator. IP Address Type the IP address of your NBG4604 in dotted decimal notation 192.168.1.1 (factory default). IP Subnet Mask The subnet mask specifies the network number portion of an IP address. Your NBG4604 will automatically calculate the subnet mask based on the IP address that you assign. Unless you are implementing subnetting, use the subnet mask computed by the NBG4604. Apply Click Apply to save your changes back to the NBG4604. Reset Click Reset to begin configuring this screen afresh. NBG4604 User's Guide 109