ZyXEL NBG4604 User Guide - Page 45
Summary: DHCP Table - remote management
View all ZyXEL NBG4604 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Chapter 3 The Web Configurator Table 16 Screens Summary LINK TAB FUNCTION Static Route IP Static Route Use this screen to configure IP static routes. Bandwidth General MGMT Use this screen to configure a bandwidth management service type. Advanced Use this screen to configure bandwidth management for specific types of applications. Remote MGMT WWW Use this screen to configure through which interface(s) and from which IP address(es) users can use HTTP to manage the NBG4604. Telnet Use this screen to configure through which interface(s) and from which IP address(es) users can use Telnet to manage the NBG4604. FTP Use this screen to configure through which interface(s) and from which IP address(es) users can use FTP to access the NBG4604 SNMP Use this screen to configure through which interface(s) and from which IP address(es) users can access the SNMP agent on the NBG4604. ACS Use this screen configure ACS and upload security certificates to the device. UPnP General Use this screen to enable UPnP on the NBG4604. Maintenance System General Use this screen to view and change administrative settings such as system and domain names, password and inactivity timer. Time Setting Use this screen to change your NBG4604's time and date. Logs View Log Use this screen to view the logs for the categories that you selected. Log Settings Use this screen to activate syslog logging as well as the syslog server IP address. Tools Firmware Use this screen to upload firmware to your NBG4604. Configuration Use this screen to backup and restore the configuration or reset the factory defaults to your NBG4604. Restart This screen allows you to reboot the NBG4604 without turning the power off. Sys OP Mode General This screen allows you to select whether your device acts as a Router or a Access Point. Language This screen allows you to select the language you prefer. 3.6.2 Summary: DHCP Table DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual clients to obtain TCP/IP configuration at start-up from a server. You can configure the NBG4604's LAN as a DHCP server or disable it. When configured as a NBG4604 User's Guide 45