ZyXEL NBG4615 v2 User Guide - Page 63
Access Point Mode
View all ZyXEL NBG4615 v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
CHAPTER 8 Access Point Mode 8.1 Overview Use your NBG4615 v2 as an access point (AP) if you already have a router or gateway on your network. In this mode your NBG4615 v2 bridges a wired network (LAN) and wireless LAN (WLAN) in the same subnet. See the figure below for an example. Figure 38 Wireless Internet Access in Access Point Mode Many screens that are available in Router Mode are not available in Access Point Mode, such as bandwidth management and firewall. Note: See Chapter 12 on page 97 for an example of setting up a wireless network in Access Point mode. 8.2 What You Can Do • Use the Status screen to view read-only information about your NBG4615 v2 (Section 8.4 on page 65). • Use the LAN screen to set the IP address for your NBG4615 v2 acting as an access point (Section 8.5 on page 67). 8.3 What You Need to Know See Chapter 12 on page 97 for a tutorial on setting up a network with the NBG4615 v2 as an access point. NBG4615 v2 User's Guide 63