ZyXEL NBG5715 User Guide - Page 171

Resetting the NBG5715 to Its Factory Defaults, 23.6 Wireless Router Troubleshooting

Page 171 highlights

Chapter 23 Troubleshooting • Check the settings for QoS. If it is disabled, you might consider activating it. 23.5 Resetting the NBG5715 to Its Factory Defaults If you reset the NBG5715, you lose all of the changes you have made. The NBG5715 re-loads its default settings, and the password resets to 1234. You have to make all of your changes again. You will lose all of your changes when you push the RESET button. To reset the NBG5715: 1 Make sure the power LED is on. 2 Press the RESET button for longer than 1 second to restart/reboot the NBG5715. 3 Press the RESET button for longer than five seconds to set the NBG5715 back to its factory-default configurations. If the NBG5715 restarts automatically, wait for the NBG5715 to finish restarting, and log in to the Web Configurator. The password is "1234". If the NBG5715 does not restart automatically, disconnect and reconnect the NBG5715's power. Then, follow the directions above again. 23.6 Wireless Router Troubleshooting I cannot access the NBG5715 or ping any computer from the WLAN. 1 Make sure the wireless LAN is enabled on the NBG5715. Check if the WLAN button is at the ON position. Or you can enable the wireless LAN in the Network > Wireless LAN 2.4G/5G > General screen. 2 Make sure the wireless adapter on the wireless station is working properly. 3 Make sure the wireless adapter installed on your computer is IEEE 802.11 compatible and supports the same wireless standard as the NBG5715. 4 Make sure your computer (with a wireless adapter installed) is within the transmission range of the NBG5715. 5 Check that both the NBG5715 and your wireless station are using the same wireless and wireless security settings. NBG5715 User's Guide 171

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252

Chapter 23 Troubleshooting
NBG5715 User’s Guide
171
Check the settings for QoS. If it is disabled, you might consider activating it.
23.5
Resetting the NBG5715 to Its Factory Defaults
If you reset the NBG5715, you lose all of the changes you have made. The NBG5715 re-loads its
default settings, and the password resets to
1234
. You have to make all of your changes again.
You will lose all of your changes when you push the
RESET
button.
To reset the NBG5715:
1
Make sure the power LED is on.
2
Press the
RESET
button for longer than 1 second to restart/reboot the NBG5715.
3
Press the
RESET
button for longer than five seconds to set the NBG5715 back to its factory-default
configurations.
If the NBG5715 restarts automatically, wait for the NBG5715 to finish restarting, and log in to the
Web Configurator. The password is “1234”.
If the NBG5715 does not restart automatically,
di
sconnect and reconnect the NBG5715’s power.
Then, follow the directions above again.
23.6
Wireless Router Troubleshooting
I cannot access the NBG5715 or ping any computer from the WLAN.
1
Make sure the wireless LAN is enabled on the NBG5715. Check if the
WLAN
button is at the
ON
position. Or you can enable the wireless LAN in the
Network > Wireless LAN 2.4G/5G >
General
screen.
2
Make sure the wireless adapter on the wireless station is working properly.
3
Make sure the wireless adapter installed on your computer is IEEE 802.11 compatible and supports
the same wireless standard as the NBG5715.
4
Make sure your computer (with a wireless adapter installed) is within the transmission range of the
NBG5715.
5
Check that both the NBG5715 and your wireless station are using the same wireless and wireless
security settings.