ZyXEL NWA5301-NJ User Guide - Page 120
Configuration > Object > AP Profile > SSID > Security List > Add/Edit Security Profile continued
View all ZyXEL NWA5301-NJ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
Chapter 10 AP Profile Table 54 Configuration > Object > AP Profile > SSID > Security List > Add/Edit Security Profile (continued) LABEL DESCRIPTION Primary / Secondary Radius Server Activate Select this to have the NWA/WAC use the specified RADIUS server. Radius Server IP Enter the IP address of the RADIUS server to be used for authentication. Address Radius Server Port Enter the port number of the RADIUS server to be used for authentication. Radius Server Secret Enter the shared secret password of the RADIUS server to be used for authentication. Primary / Secondary Accounting Server Activate Select the check box to enable user accounting through an external authentication server. Accounting Enter the IP address of the external accounting server in dotted decimal notation. Server IP Address Accounting Server Port Enter the port number of the external accounting server. The default port number is 1813. You need not change this value unless your network administrator instructs you to do so with additional information. Accounting Share Secret Enter a password (up to 128 alphanumeric characters) as the key to be shared between the external accounting server and the NWA/WAC. The key must be the same on the external accounting server and your NWA/WAC. The key is not sent over the network. Accounting Interim This field is available only when you enable user accounting through an external Update authentication server. Select this to have the NWA/WAC send subscriber status updates to the accounting server at the interval you specify. Interim Update Interval Specify the time interval for how often the NWA/WAC is to send a subscriber status update to the accounting server. 802.1X Select this to enable 802.1x secure authentication. ReAuthenticatio Enter the interval (in seconds) between authentication requests. Enter a 0 for unlimited n Timer requests. WEP Authentication Settings Idle Timeout Enter the idle interval (in seconds) that a client can be idle before authentication is discontinued. Authentication Type Select a WEP authentication method. Choices are Open or Share key. Share key is only available if you are not using 802.1x. Key Length Select the bit-length of the encryption key to be used in WEP connections. If you select WEP-64: • Enter 10 hexadecimal digits in the range of "A-F", "a-f" and "0-9" (for example, 0x11AA22BB33) for each Key used. or • Enter 5 ASCII characters (case sensitive) ranging from "a-z", "A-Z" and "0-9" (for example, MyKey) for each Key used. If you select WEP-128: • Enter 26 hexadecimal digits in the range of "A-F", "a-f" and "0-9" (for example, 0x00112233445566778899AABBCC) for each Key used. or • Enter 13 ASCII characters (case sensitive) ranging from "a-z", "A-Z" and "0-9" (for example, MyKey12345678) for each Key used. Key 1~4 Based on your Key Length selection, enter the appropriate length hexadecimal or ASCII key. WPA2/WPA2-Mix Authentication Settings NWA / WAC Series User's Guide 120