ZyXEL NWA5301-NJ User Guide - Page 170
SNMP Traps, 14.8.3 Configuring SNMP, Configuration > System > SNMP,
View all ZyXEL NWA5301-NJ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 170 highlights
Chapter 14 System administrators collect statistical data and monitor status and performance. You can download the NWA/WAC's MIBs from www.zyxel.com. 14.8.2 SNMP Traps The NWA/WAC will send traps to the SNMP manager when any one of the following events occurs. Table 77 SNMP Traps OBJECT LABEL linkDown linkUp authenticationFailure OBJECT ID 1.3.6.1.6.3.1.1.5.3 1.3.6.1.6.3.1.1.5.4 1.3.6.1.6.3.1.1.5.5 DESCRIPTION This trap is sent when the Ethernet link is down. This trap is sent when the Ethernet link is up. This trap is sent when an SNMP request comes from nonauthenticated hosts. 14.8.3 Configuring SNMP To change your NWA/WAC's SNMP settings, click Configuration > System > SNMP tab. The screen appears as shown. Use this screen to configure your SNMP settings. You can also configure user profiles that define allowed SNMPv3 access. Figure 110 Configuration > System > SNMP The following table describes the labels in this screen. Table 78 Configuration > System > SNMP LABEL DESCRIPTION Enable Select the check box to allow or disallow users to access the NWA/WAC using SNMP. Server Port You may change the server port number for a service if needed, however you must use the same port number in order to use that service for remote management. Trap NWA / WAC Series User's Guide 170