ZyXEL NWA5301-NJ User Guide - Page 200
Antenna Switch, 19.1 Overview, 19.1.1 What You Need To Know, 19.2 Antenna Switch Screen
View all ZyXEL NWA5301-NJ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 200 highlights
CHAPTER 19 Antenna Switch 19.1 Overview Use this screen to adjust coverage depending on the orientation of the antenna. 19.1.1 What You Need To Know Positioning the antennas properly increases the range and coverage area of a wireless LAN. On the NWA/WAC that comes with internal antennas and also has an antenna switch, you can adjust coverage depending on the orientation of the antenna for the NWA/WAC radios using the web configurator, the command line interface (CLI) or a physical switch. Check Table 1 on page 13 and Table 3 on page 15 to see if your NWA/WAC has an antenna switch. Figure 125 WAC6103D-I Physical Antenna Switch Note: With the physical antenna switch, you apply the same antenna orientation settings to both radios. You can set the radios to have different settings while using the web configurator or the command line interface. Note: The antenna switch in the web configurator has priority over the physical antenna switch after you Enable Software Control in the Maintenance > Antenna screen. By default, software control is disabled. 19.2 Antenna Switch Screen To access this screen, click Maintenance > Antenna. NWA / WAC Series User's Guide 200