ZyXEL NWA5301-NJ User Guide - Page 33
Starting and Stopping the NWA/WAC
View all ZyXEL NWA5301-NJ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Chapter 1 Introduction Figure 10 NWA1123-AC HD, NWA5123-AC HD and WAC6303D-S LED The following are the LED descriptions for your NWA/WAC. Table 13 NWA1123-AC HD, NWA5123-AC HD and WAC6303D-S LED COLOR STATUS DESCRIPTION Amber Slow Blinking (On for 1s, Off for 1s) The NWA/WAC is booting up. Green On Amber Slow Blinking (blink for 3 The NWA/WAC is discovering an AP controller. times, Off for 3s) Green On Green On The NWA/WAC is ready for use, the NWA/WAC's wireless interface is activated, and/or wireless clients are connected to the NWA/WAC. Bright Blue On The NWA/WAC's wireless interface is activated, but there are no wireless clients connected. Red On The NWA/WAC failed to boot up or is experience system failure. Red Fast Blinking (On for The NWA/WAC is undergoing firmware upgrade. 50ms, Off for 50ms) Red Slow Blinking (blink for 3 The Uplink port is disconnected. times, Off for 3s) Green Slow Blinking (blink for 1 The wireless LAN is disabled or fails. time, Off for 1s) Blue Slow Blinking (blink for 1 The NWA/WAC is checking for an available 5GHz channel. time, Off for 1s) 1.7 Starting and Stopping the NWA/WAC Here are some of the ways to start and stop the NWA/WAC. NWA / WAC Series User's Guide 33