ZyXEL NWA5301-NJ User Guide - Page 171
Adding or Editing an SNMPv3 User Profile, Configuration > System > SNMP,
View all ZyXEL NWA5301-NJ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 171 highlights
Chapter 14 System Table 78 Configuration > System > SNMP (continued) LABEL DESCRIPTION Community Type the trap community, which is the password sent with each trap to the SNMP manager. The default is public and allows all requests. Destination Type the IP address of the station to send your SNMP traps to. Trap Wireless Event Select this to have the NWA/WAC send a trap to the SNMP manager when a wireless client is connected to or disconnected from the NWA/WAC. SNMPv2c Select this to allow SNMP managers using SNMPv2c to access the NWA/WAC. Get Community Enter the Get Community, which is the password for the incoming Get and GetNext requests from the management station. The default is public and allows all requests. Set Community Enter the Set community, which is the password for incoming Set requests from the management station. The default is private and allows all requests. SNMPv3 Select this to allow SNMP managers using SNMPv3 to access the NWA/WAC. Add Click this to create a new entry. Select an entry and click Add to create a new entry after the selected entry. Edit Double-click an entry or select it and click Edit to be able to modify the entry's settings. Remove To remove an entry, select it and click Remove. The NWA/WAC confirms you want to remove it before doing so. Note that subsequent entries move up by one when you take this action. # This the index number of an SNMPv3 user profile. User Name This is the name of the user for which this SNMPv3 user profile is configured. Authentication This field displays the type of authentication the SNMPv3 user must use to connect to the NWA/ WAC using this SNMPv3 user profile. Privacy This field displays the type of encryption the SNMPv3 user must use to connect to the NWA/ WAC using this SNMPv3 user profile. Privilege This field displays whether the SNMPv3 user can have read-only or read and write access to the NWA/WAC using this SNMPv3 user profile. Apply Click Apply to save your changes back to the NWA/WAC. Reset Click Reset to return the screen to its last-saved settings. 14.8.4 Adding or Editing an SNMPv3 User Profile This screen allows you to add or edit an SNMPv3 user profile. To access this screen, click the Configuration > System > SNMP screen's Add button or select a SNMPv3 user profile from the list and click the Edit button. Figure 111 Configuration > System > SNMP > Add NWA / WAC Series User's Guide 171