ZyXEL NWA5301-NJ User Guide - Page 29
Nwa5301-nj, Led On, Color, Status, Description, Label
View all ZyXEL NWA5301-NJ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Chapter 1 Introduction Table 9 NWA1123-AC PRO and WAC6103D-I LEDs (continued) LED COLOR STATUS DESCRIPTION Locator White Blinking The Locator is activated and will show the actual location of the NWA/WAC between several devices in the network. Off The Locator function is off. 1.6.3 NWA5301-NJ The LEDs automatically turn off when the NWA5301-NJ is ready. You can press the LED ON button for one second to turn on the LEDs again. The LEDs will blink and turn off after two minutes. Figure 7 NWA5301-NJ LEDs The following are the LED descriptions for your NWA5301-NJ. Table 10 NWA5301-NJ LEDs LABEL COLOR STATUS PWR/SYS Amber Slow Blinking (On for 1s, Off for 1s) Green On Amber Off Green On Amber Slow Blinking (blink for 3 times, Off for 3s) Green On Amber On Green Off Amber Fast Blinking (On for 50ms times, Off for 50ms) Green Off Amber Slow Blinking (blink for 3 times, Off for 3s) Green Off Amber Slow Blinking (blink for 2 times, Off for 3s) Green Off PoE Green On Off DESCRIPTION The NWA is booting up. The NWA is ready for use. The NWA is discovering an AP controller The NWA failed to boot up or is experiencing system failure. The NWA is undergoing firmware upgrade. The Uplink port is disconnected. The wireless module of the WAC is disabled or failed. Power is supplied to the yellow PoE Ethernet port (LAN1). There is no power supply. NWA / WAC Series User's Guide 29