ZyXEL NWA90AX User Guide - Page 127
Add/Edit Layer-2 Isolation Profile, LABEL, DESCRIPTION
![]() |
View all ZyXEL NWA90AX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
Chapter 12 AP Profile 12.6.1 Add/Edit Layer-2 Isolation Profile This screen allows you to create a new layer-2 isolation profile or edit an existing one. To access this screen, click the Add button or select a layer-2 isolation profile from the list and click the Edit button. Note: You need to know the MAC address of each wireless client, AP, computer or router that you want to allow to communicate with the Zyxel Device's wireless clients. Figure 85 Configuration > Object > AP Profile > SSID > Layer-2 Isolation List > Add/Edit Layer-2 Isolation Profile The following table describes the labels in this screen. Table 51 Configuration > Object > AP Profile > SSID > Layer-2 Isolation List > Add/Edit Layer-2 Isolation Profile LABEL DESCRIPTION Profile Name Enter up to 31 alphanumeric characters for the profile name. This name is only visible in the Web Configurator and is only for management purposes. Spaces and underscores are allowed. Add Click this to add a MAC address to the profile's list. Edit Click this to edit the selected MAC address in the profile's list. Remove Click this to remove the selected MAC address from the profile's list. # This field is a sequential value, and it is not associated with a specific user. MAC This field specifies a MAC address associated with this profile. You can click the MAC address to make it editable. Description This field displays a description for the MAC address associated with this profile. You can click the description to make it editable. Enter up to 60 characters, spaces and underscores allowed. OK Click OK to save your changes back to the Zyxel Device. Cancel Click Cancel to exit this screen without saving your changes. NWA50AX/NWA90AX/NWA55AXE Series User's Guide 127
![](/manual_guide/products/zyxel-nwa55axe-user-guide-90d1ea8/127.png)