Home » ZyXEL Manuals » Wireless » ZyXEL NWA90AX » Manual Viewer

ZyXEL NWA90AX User Guide - Page 82

Rogue AP, Rogue AP Detection, Configuration > Wireless > Rogue AP, LABEL, DESCRIPTION

Add to My Manuals
Save this manual to your list of manuals

Page 82 highlights

Chapter 10 Wireless Table 28 Configuration > Wireless > AP Management (continued) LABEL DESCRIPTION Enable WDS Wireless If you set the Zyxel Device as a root AP, the radio that's bridging with the Zyxel Device Bridging should be in repeater mode. Be careful to avoid bridge loops. For example, if your root AP and the Zyxel Device are connected to a switch, and they're also connected to each other using a WiFi connection. This will create bridge loops. Uplink Selection Mode This field is available only when the radio is in Repeater mode. Select this to enable WDS wireless bridging on the Zyxel Device. See Section 1.2 on page 12 for more information on Wireless Distribution System (WDS). This field is available only when the radio is in Repeater mode. Select AUTO to have the Zyxel Device automatically use the settings in the applied WDS profile to connect to a root AP or repeater. Select Manual to have the Zyxel Device connect to the root AP or repeater with the MAC address specified in the Radio 1 Uplink MAC Address field. Setup Wireless Bridge Click this to show the Wireless Bridge Vlan Setting pop-up window. This link is available only Vlan ID when the radio is in Root AP or Repeater mode. Wireless Bridge Vlan Setting Add Click this to add an entry in the table. Remove Select an entry and click this to remove the selected entry. # This field is a sequential value. It is not associated with any VLAN ID. Wireless Bridge Vlan ID Enter a VLAN ID for the wireless bridge. The VLAN IDs you set on your root AP should be the same as the VLAN ID you set here. See Section 1.2 on page 12 for more information on wireless bridge. OK Click OK to save your changes back to the Zyxel Device. Close Click Close to close the pop-up window without saving your changes. Max Output Power Enter the maximum output power (between 0 to 30 dBm) of the Zyxel Device in this field. If there is a high density of APs in an area, decrease the output power of the Zyxel Device to reduce interference with other APs. MBSSID Settings Edit # SSID Profile Apply Reset Note: Reducing the output power also reduces the Zyxel Device's effective broadcast radius. Click Edit ( )to open a screen where you can modify the entry's settings. In some tables you can just click a table entry and edit it directly in the table. For those types of tables small red triangles display for table entries with changes that you have not yet applied. This field shows the index number of the SSID This field shows the SSID profile that is associated with the radio profile. Click Apply to save your changes back to the Zyxel Device. Click Reset to return the screen to its last-saved settings. 10.3 Rogue AP Use this screen to enable Rogue AP Detection and import/export a rogue or friendly AP list in a txt file. Click Configuration > Wireless > Rogue AP to access this screen. NWA50AX/NWA90AX/NWA55AXE Series User's Guide 82

Section	Page
NWA50AX/NWA90AX/NWA55AXE	1
Document Conventions	3
Contents Overview	4
Table of Contents	5
Introduction	12
1.1 Overview	12
1.2 Zyxel Device Roles	12
1.2.1 Root AP	14
1.2.2 Wireless Repeater	14
1.2.3 Radio Frequency (RF) Monitor	15
1.3 Sample Feature Applications	16
1.3.1 MBSSID	16
1.3.2 Dual-Radio	17
1.4 Zyxel Device Product Feature	18
AP Management	20
2.1 Management Mode	20
2.1.1 Standalone	20
2.1.2 Nebula Control Center	20
2.2 Switching Management Modes	22
2.3 Zyxel One Network (ZON) Utility	22
2.3.1 Requirements	22
2.3.2 Run the ZON Utility	23
2.4 Ways to Access the Zyxel Device	26
2.5 Good Habits for Managing the Zyxel Device	27
Hardware	28
3.1 Zyxel Device Single LED	28
3.1.1 Zyxel Device LED	28
Web Configurator	31
4.1 Overview	31
4.2 Accessing the Web Configurator	31
4.3 Navigating the Web Configurator	34
4.3.1 Title Bar	35
4.3.2 Navigation Panel	36
4.3.3 Standalone Mode Navigation Panel Menus	36
4.3.4 Cloud Mode Navigation Panel Menus	38
4.3.5 Tables and Lists	39
Standalone Configuration	42
Standalone Configuration	43
5.1 Overview	43
5.2 Starting and Stopping the Zyxel Device	43
Dashboard	45
6.1 Overview	45
6.1.1 CPU Usage	48
6.1.2 Memory Usage	49
Setup Wizard	51
7.1 Accessing the Wizard	51
7.2 Using the Wizard	51
7.2.1 Step 1 Time Settings	51
7.2.2 Step 2 Password and Uplink Connection	52
7.2.3 Step 3 Radio	53
7.2.4 Step 4 SSID	54
7.2.5 Summary	55
Monitor	56
8.1 Overview	56
8.1.1 What You Can Do in this Chapter	56
8.2 What You Need to Know	56
8.3 Network Status	57
8.3.1 Port Statistics Graph	58
8.4 Radio List	59
8.4.1 AP Mode Radio Information	61
8.5 Station List	62
8.6 WDS Link Info	63
8.7 Detected Device	64
8.8 View Log	66
Network	69
9.1 Overview	69
9.1.1 What You Can Do in this Chapter	69
9.2 IP Setting	69
9.3 VLAN	71
9.4 NCC Discovery	74
Wireless	76
10.1 Overview	76
10.1.1 What You Can Do in this Chapter	76
10.1.2 What You Need to Know	77
10.2 AP Management	77
10.3 Rogue AP	82
10.3.1 Add/Edit Rogue/Friendly List	85
10.4 DCS	86
10.5 Technical Reference	86
User	88
11.1 Overview	88
11.1.1 What You Can Do in this Chapter	88
11.1.2 What You Need To Know	88
11.2 User Summary	89
11.2.1 Add/Edit User	89
11.3 Setting	91
11.3.1 Edit User Authentication Timeout Settings	93
AP Profile	95
12.1 Overview	95
12.1.1 What You Can Do in this Chapter	95
12.1.2 What You Need To Know	95
12.2 Radio	96
12.2.1 Add/Edit Radio Profile	97
12.3 SSID	102
12.3.1 SSID List	103
12.3.2 Add/Edit SSID Profile	104
12.4 Security List	107
12.4.1 Add/Edit Security Profile	107
12.5 MAC Filter List	124
12.5.1 Add/Edit MAC Filter Profile	124
12.6 Layer-2 Isolation List	125
12.6.1 Add/Edit Layer-2 Isolation Profile	127
WDS Profile	128
13.1 Overview	128
13.1.1 What You Can Do in this Chapter	128
13.2 WDS Profile	128
13.2.1 Add/Edit WDS Profile	129
Certificates	130
14.1 Overview	130
14.1.1 What You Can Do in this Chapter	130
14.1.2 What You Need to Know	130
14.1.3 Verifying a Certificate	132
14.2 My Certificates	133
14.2.1 Add My Certificates	134
14.2.2 Edit My Certificates	136
14.2.3 Import Certificates	139
14.3 Trusted Certificates	140
14.3.1 Edit Trusted Certificates	141
14.3.2 Import Trusted Certificates	144
14.4 Technical Reference	145
System	146
15.1 Overview	146
15.1.1 What You Can Do in this Chapter	146
15.2 Host Name	146
15.3 Date and Time	147
15.3.1 Pre-defined NTP Time Servers List	149
15.3.2 Time Server Synchronization	150
15.4 WWW Overview	151
15.4.1 Service Access Limitations	151
15.4.2 System Timeout	151
15.4.3 HTTPS	151
15.4.4 Configuring WWW Service Control	152
15.4.5 HTTPS Example	153
15.5 SSH	159
15.5.1 How SSH Works	160
15.5.2 SSH Implementation on the Zyxel Device	161
15.5.3 Requirements for Using SSH	161
15.5.4 Configuring SSH	161
15.5.5 Examples of Secure Telnet Using SSH	162
15.6 FTP	163
Log and Report	165
16.1 Overview	165
16.1.1 What You Can Do In this Chapter	165
16.2 Email Daily Report	165
16.3 Log Setting	167
16.3.1 Log Setting Screen	168
16.3.2 Edit System Log Settings	169
16.3.3 Edit Remote Server	173
16.3.4 Active Log Summary	174
File Manager	177
17.1 Overview	177
17.1.1 What You Can Do in this Chapter	177
17.1.2 What you Need to Know	177
17.2 Configuration File	178
17.2.1 Example of Configuration File Download Using FTP	182
17.3 Firmware Package	183
17.3.1 Example of Firmware Upload Using FTP	184
17.4 Shell Script	185
Diagnostics	188
18.1 Overview	188
18.1.1 What You Can Do in this Chapter	188
18.2 Diagnostics	188
18.3 Remote Capture	189
LEDs	190
19.1 Overview	190
19.1.1 What You Can Do in this Chapter	190
19.2 Suppression Screen	190
19.3 Locator Screen	191
Reboot	193
20.1 Overview	193
20.1.1 What You Need To Know	193
20.2 Reboot	193
Shutdown	194
21.1 Overview	194
21.1.1 What You Need To Know	194
21.2 Shutdown	194
Local Configuration in Cloud Mode	195
Cloud Mode	196
22.1 Overview	196
22.2 Cloud Mode Web Configurator Screens	196
22.3 Dashboard	197
Network	199
23.1 Overview	199
23.1.1 What You Can Do in this Chapter	199
23.2 IP Setting	199
23.3 VLAN	201
Maintenance	202
24.1 Overview	202
24.1.1 What You Can Do in this Chapter	202
24.2 Shell Script	202
24.3 Diagnostics	203
24.4 View Log	204
Appendices and Troubleshooting	207
Troubleshooting	208
25.1 Overview	208
25.2 Power, Hardware Connections, and LED	208
25.3 Zyxel Device Management, Access, and Login	209
25.4 Internet Access	212
25.5 WiFi Network	213
25.6 Resetting the Zyxel Device	215
25.7 Getting More Troubleshooting Help	215
Importing Certificates	216
IPv6	240
Customer Support	248
Legal Information	253

Match case Limit results 1 per page

Chapter 10 Wireless

NWA50AX/NWA90AX/NWA55AXE Series User’s Guide

10.3

Rogue AP

Use this screen to enable

Rogue AP Detection

and import/export a rogue or friendly AP list in a txt file.

Click

Configuration > Wireless > Rogue AP

to access this screen.

Enable WDS Wireless

Bridging

If you set the Zyxel Device as a root AP, the radio that’s bridging with the Zyxel Device

should be in repeater mode.

Be careful to avoid bridge loops. For example, if your root AP and the Zyxel Device are

connected to a switch, and they’re also connected to each other using a WiFi connection.

This will create bridge loops.

This field is available only when the radio is in

Repeater

mode. Select this to enable WDS

wireless bridging on the Zyxel Device. See

Section 1.2 on page 12

for more information on

Wireless Distribution System (WDS).

Uplink Selection

Mode

This field is available only when the radio is in

Repeater

mode.

Select

AUTO

to have the Zyxel Device automatically use the settings in the applied WDS

profile to connect to a root AP or repeater.

Select

Manual

to have the Zyxel Device connect to the root AP or repeater with the MAC

address specified in the

Radio 1 Uplink MAC Address

field.

Setup Wireless Bridge

Vlan ID

Click this to show the

Wireless Bridge Vlan Setting

pop-up window. This link is available only

when the radio is in

Root AP

Repeater

mode.

Wireless Bridge Vlan Setting

Add

Click this to add an entry in the table.

Remove

Select an entry and click this to remove the selected entry.

This field is a sequential value. It is not associated with any VLAN ID.

Wireless Bridge

Vlan ID

Enter a VLAN ID for the wireless bridge. The VLAN IDs you set on your root AP should be the

same as the VLAN ID you set here. See

Section 1.2 on page 12

for more information on

wireless bridge.

Click

to save your changes back to the Zyxel Device.

Click

to close the pop-up window without saving your changes.

Max Output Power

Enter the maximum output power (between 0 to 30 dBm) of the Zyxel Device in this field. If

there is a high density of APs in an area, decrease the output power of the Zyxel Device to

reduce interference with other APs.

Note: Reducing the output power also reduces the Zyxel Device’s effective

broadcast radius.

MBSSID Settings

Edit

Click

Edit

(

)to open a screen where you can modify the entry’s settings. In some tables

you can just click a table entry and edit it directly in the table. For those types of tables small

red triangles display for table entries with changes that you have not yet applied.

This field shows the index number of the SSID

SSID Profile

This field shows the SSID profile that is associated with the radio profile.

Apply

Click

Apply

to save your changes back to the Zyxel Device.

Reset

Click

Reset

to return the screen to its last-saved settings.

Table 28

Configuration > Wireless > AP Management (continued)

LABEL

DESCRIPTION