ZyXEL NWA90AX User Guide - Page 20
AP Management, 2.1 Management Mode, 2.1.1 Standalone, 2.1.2 Nebula Control Center, Standalone
View all ZyXEL NWA90AX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
CHAPTER 2 AP Management 2.1 Management Mode The Zyxel Device is a unified AP and can be managed by the NCC or work as a standalone device. We recommend you use NCC to manage multiple APs (see the NCC User's Guide). Note: Not all models can be managed by NCC or an AC. See Section 1.4 on page 18 to check whether your product supports these. The following table shows the default IP addresses and firmware upload methods for different management modes. Table 2 Zyxel Device Management Mode Comparison MANAGEMENT MODE DEFAULT IP ADDRESS Nebula Control Center Dynamic Standalone Dynamic or Static (192.168.1.2) UPLOAD FIRMWARE VIA NCC Portal Built-in Web Configurator When the Zyxel Device is in standalone mode and connects to a DHCP server, it uses the IP address assigned by the DHCP server. Otherwise, the Zyxel Device uses the default static management IP address (192.168.1.2). You can use the NCC Discovery screen to allow the Zyxel Device to be managed by the NCC. When the Zyxel Device is managed by the NCC, it acts as a DHCP client and obtains an IP address from the NCC. It can be configured ONLY by the NCC. To change the Zyxel Device back to standalone mode, use the Reset button to restore the default configuration. Alternatively, you need to check the NCC for the Zyxel Device's IP address and use FTP to upload the default configuration file at conf/ system-default.conf to the Zyxel Device and reboot the device. 2.1.1 Standalone When working in standalone mode, the Zyxel Device is configured mainly with its built-in Web Configurator. You can only connect to and set up one Zyxel Device at a time in this mode. See Chapter 5 on page 43 for detailed information about the standalone Web Configurator screens. 2.1.2 Nebula Control Center In this mode, which is also called cloud mode, you can manage and monitor the Zyxel Device through the Zyxel Nebula cloud-based network management system. This means you can manage devices remotely without the need of connecting to each device directly. It offers many features to better manage and monitor not just the Zyxel Device, but your network as a whole, including supported switches and gateways. Your network can also be managed through your smartphone using the Nebula Mobile app. See Section on page 196 for an example NCC managed network topology. NWA50AX/NWA90AX/NWA55AXE Series User's Guide 20