ZyXEL NWA90AX User Guide - Page 69
Network, 9.1 Overview, 9.1.1 What You Can Do in this IP Setting
View all ZyXEL NWA90AX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
CHAPTER 9 Network 9.1 Overview This chapter describes how you can configure the management IP address and VLAN settings of your Zyxel Device. The Internet Protocol (IP) address identifies a device on a network. Every networking device (including computers, servers, routers, printers, etc.) needs an IP address to communicate across the network. These networking devices are also known as hosts. Figure 45 IP Setup The figure above illustrates one possible setup of your Zyxel Device. The gateway IP address is 192.168.1.1 and the managed IP address of the Zyxel Device is 192.168.1.2 (default), but if the Zyxel Device is assigned an IP address by a DHCP server, the default (192.168.1.2) will not be used. The gateway and the Zyxel Device must belong in the same IP subnet to be able to communicate with each other. 9.1.1 What You Can Do in this Chapter • The IP Setting screen (Section 9.2 on page 69) configures the Zyxel Device's LAN IP address. • The VLAN screen (Section 9.3 on page 71) configures the Zyxel Device's VLAN settings. • The NCC Discovery screen (Section 9.4 on page 74) configures the Zyxel Device's Nebula Control Center (NCC) discovery settings. 9.2 IP Setting Use this screen to configure the IP address for your Zyxel Device. To access this screen, click Configuration > Network > IP Setting. NWA50AX/NWA90AX/NWA55AXE Series User's Guide 69