ZyXEL P-660HN-T1A Support Guide - Page 101
Step 7: You may need more than one access point is the RF coverage area - repeater
![]() |
View all ZyXEL P-660HN-T1A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
P-660HN Series Support Notes Step 5: When you reach the farthest point of connection mark the spot. Now you move the access point to this new spot as have already determine the farthest point of the access point installation spot if wireless service is required from corner of the room. Step 6: Repeat step 1~5 and now you should be able to mark an RF coverage area as illustrated in above picutre. Step 7: You may need more than one access point is the RF coverage area have not cover all the wireless service area you needed. Step 8: Repeat step 1~6 of survey on site as necessary, upon completion you will have an diagram and information of site survey. As illustrated below. 101 All contents copyright © 2010 ZyXEL Communications Corporation.
![](/manual_guide/products/zyxel-p660hnt1a-support-guide-cc626e6/101.png)
P-660HN Series Support Notes
101
All contents copyright © 2010 ZyXEL Communications Corporation.
Step 5: When you reach the farthest point of connection mark the spot. Now
you move the access point to this new spot as have already determine the
farthest point of the access point installation spot if wireless service is required
from corner of the room.
Step 6: Repeat step 1~5 and now you should be able to mark an RF coverage
area as illustrated in above picutre.
Step 7: You may need more than one access point is the RF coverage area
have not cover all the wireless service area you needed.
Step 8: Repeat step 1~6 of survey on site as necessary, upon completion you
will have an diagram and information of site survey. As illustrated below.