ZyXEL P-660HN-T1A Support Guide - Page 71
LAN -> IP/DHCP Setup
View all ZyXEL P-660HN-T1A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
P-660HN Series Support Notes networks that we call 'IP Alias 1' and 'IP Alias 2' can be configured in Network -> LAN -> IP Alias. There are three internal virtual LAN interfaces for the P-660HN-T1A to route the packets from/to the three networks correctly. They are enif0 for the major network, enif0:0 for the IP alias 1 and enif0:1 for the IP alias 2. Therefore, three routes are created in the P-660HN-T1A as shown below when the three networks are configured. If the P-660HN-T1A's DHCP is also enabled, the IP pool for the clients can be any of the three networks. You can edit filter rule to accept or deny LAN packets from/to the IP alias 1/2 go through the P-660HN-T1A by command in CLI: lan index [index number] Usage: index number =1 main LAN 2 IP Alias#1 3 IP Alias#2 lan filter [set#] Usage: set#= the corresponding filter set number you‟ve configured lan save IP Alias Setup (1) Edit the first network in Web Configurator, Advanced Setup, Network -> LAN -> IP/DHCP Setup by configuring the P-660HN-T1A's first LAN IP address. 71 All contents copyright © 2010 ZyXEL Communications Corporation.