ZyXEL P-660HN-T1A Support Guide - Page 115
Using FTP to Upload the Firmware and Configuration Files, Using FTP client software, Step 1, Step2, - default username and password
View all ZyXEL P-660HN-T1A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
P-660HN Series Support Notes [cppwu@faelinux cppwu]$ tftp -I 192.168.1.1 put [local-ras] ras
P-660HN Series Support Notes
115
All contents copyright © 2010 ZyXEL Communications Corporation.
[cppwu@faelinux cppwu]$ tftp
-I 192.168.1.1 put [local-ras] ras
<- upload firmware
3. Using FTP to Upload the Firmware and Configuration Files
In addition to upload the firmware and configuration file via the console port
and TFTP client, you can also upload the firmware and configuration files to
the Prestige using FTP.
To use this feature, your workstation must have a FTP client software. See the
example shown below.
Using FTP client software
Note: The remote file name for the firmware is
'ras'
and the configuration file is
'rom-0'
.
Step 1
Use FTP client from your workstation to connect to the Prestige by
entering the IP address of the Prestige.
Step2
Press
'Enter'
key to ignore the username, because the Prestige does
not check the username.
Step 3
Enter the
CLI
password as the FTP login password, the default is
'admin
'.
Step 4
Enter command
'bin'
to set the transfer type to binary.
Step 5
Use
'put'
command to transfer the file to the Prestige.
Example:
Step 1: Connect to the Prestige by entering the Prestige's IP and Administrator
password in the FTP software. Set the transfer type to
'Auto-Detect'
or