ZyXEL P-660HN-T1A Support Guide - Page 47
Status -> WAN Information
![]() |
View all ZyXEL P-660HN-T1A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
P-660HN Series Support Notes To make a server visible to the outside world, specify the port number of the service and the inside address of the server in Web Configurator, Advanced Setup, Network -> NAT -> Port Forwarding. The outside users can access the local server using the P-660HN-T1A's WAN IP address which can be obtained from Web Configurator, Status -> WAN Information. For example: Configuring an internal Web server for outside access (suppose the Server IP Address is 192.168.1.10 ) : (1) Fill in the service name and server IP Address, press button „Add‟ (2) If add successfully, the Web Configurator will display message „Configuration updated successfully‟ at the bottom. You can see the port forwarding rule on the same page, the default port for Web Server is 80: (3) If you want to change the port for Web Server, you could press button „Modify‟ on corresponding rule, then modify and apply it. Default port numbers for some services 47 All contents copyright © 2010 ZyXEL Communications Corporation.
![](/manual_guide/products/zyxel-p660hnt1a-support-guide-cc626e6/47.png)