ZyXEL P-660HN-T1A Support Guide - Page 84

P-660HN Series Support Notes mask] the rule Set the destination port and compare type (compare sys filter set destport [port#] [compare type could be 0(none)|1(equal)|2(not type = none|equal|notequal|less|greater] equal)|3(less)|4(greater) ) sys filter set srcip [address] [subnet mask] Set the source IP address and subnet mask sys filter set srcport [port#] [compare Set the source port and compare type (compare type = none|equal|not type could be 0(none)|1(equal)|2(not equal|less|greater] equal)|3(less)|4(greater) ) sys filter set tcpEstab [yes|no] Set TCP establish option sys filter set more [yes|no] Set the more option to yes/no sys filter set log [type 0-3= none | match| Set the log type (it could be 0-3 =none, match, not notmatch | both ] match, both) sys filter set actmatch[type 0-2 = checknext | forward | drop] Set the action for match sys filter set actnomatch [type 0-2 = checknext | forward | drop] Set the action for not match sys filter set offset [#] Set offset for the generic rule sys filter set length [#] Set the length for generic rule sys filter set mask [#] Set the mask for generic rule sys filter set value [(depend on length in Set the value for generic rule hex)] sys filter set clear Clear the current filter set sys filter set save Save the filter set parameters sys filter set display [set#][rule#] Display Filter set information. W/o parameter, it will display buffer information. sys filter set freememory Discard Changes 16. Change WAN MTU via WEB-GUI. You can change WAN MTU by: Network > WAN > Internet Connection > Advanced Setup, the default value is 1500. 84 All contents copyright © 2010 ZyXEL Communications Corporation.