ZyXEL U-336E User Manual - Page 20
DTE mode: Clear To Send indicator; lights up when modem
View all ZyXEL U-336E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
AA Auto-Answer indicator, lights up when your modem is in the Auto Answer Mode; flashes when modem rings. In error control mode, it flashes when retransmitting. CD Carrier Detect indicator; lights up when a valid carrier is detected present on the line. OH Off-Hook indicator, lights up when your modem is in data mode or off-hook. It goes out when your modem is in talk mode or on-hook. DTR Data Terminal Ready indicator, lights up when your DTE or computer indicates that it is ready to begin communication. DSR DTE mode: Data Set Ready Indicator, lights up when the modem is ready for communication. CTS DTE mode: Clear To Send indicator; lights up when modem can accept data for transmission. It indicates the signal status of RS232 signal CTS. RTS DTE mode: Request To Send indicator; indicates the signal status of RS232 signal RTS from DTE. RTS is used for hardware flow control in asynchronous data transmission. TXD Transmit indicator, ON when your DTE/computer transmits data on the serial port. RXD Receive indicator, ON when your DTE/computer receives data on the serial port. SQ Signal Quality Indicator, ON when signal quality is good, flashes when signal quality is marginal, and flashes during power up to indicate an error condition. TST Test indicator, ON when modem is in a test mode. 8 Installation