ZyXEL U-336E User Manual - Page 69
Request DCE manufacturer
![]() |
View all ZyXEL U-336E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Command Value Description parameter n=0 Determine that T.4 EOL patterns are bit aligned (as received). n=1 Determine that the last received bits of T.4 EOL patterns are byte aligned by the DCE, with necessary zero fill bits inserted. +FIE=n Procedure interrupt parameter n=0 Procedure interrupt requests from the remote station are ignored, and not reported to the DTE. n=1 Procedure interrupt requests from the remote station are accepted, negotiated and reported using the +FVO response. +FIP Initialize facsimile parameters to factory default. +FIS=vr,br,wd,l Current session parameter. refer to n,df,ec,bf,st +FDCC Class 2 command in previous section parameter settings. +FKS Session termination command. +FLI="string" Local ID string parameter. +FLO=n Flow control options: n=0 No flow control. n=1 Set XON/XOFF software flow control. n=2 Set CTS/RTS hardware flow control. +FLP=n Document for polling command: n=0 The DTE has no document for polling. n=1 Indicated document available for polling. +FMI? Request DCE manufacturer identification. +FMM? Request DCE model identification. Fax Operation 57
![](/manual_guide/products/zyxel-u336e-user-manual-04f1f9b/69.png)