ZyXEL U-336E User Manual - Page 97
Extended S-Registers ATSn=x
![]() |
View all ZyXEL U-336E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Command Function & Description +Ref. modem will dial as soon as it detects a dial tone. This register also sets the time-out interval for the "W" dial modifier to wait for the dial tone. (See also S41b4) S7= Set duration, in number of seconds modem +060 waits for a carrier S8= Set duration, in seconds, for pause (,) option +002 in Dial command and pause between command re-executions for Repeat (>) command S9= Set duration, in tenths of a second of remote +006 carrier signal before recognition (Ignored if in non-FSK or half-duplex operation) S10= Set duration, in tenths of a second, modem +007 waits after loss of carrier before hanging up S11= Set duration and spacing, in milliseconds, of +070 dialed Touch-Tones Extended S-Registers "ATSn=x" Command bit dec hex Function and description Ref. S13= bit dec hex Bit-mapped register +000 1 2 2 Capture modem manufacturer information during V.42 handshake, can be displayed at ATI2 line if available ('Flash' or ' ZyXEL' stands for ZyXEL connection) S14= bit dec hex Bit-mapped register: +002 0 0 0 Modem auto-handshake on *M0 Originate mode 1 1 Modem auto-handshake on *M1 Status Registers & Result Codes 85
![](/manual_guide/products/zyxel-u336e-user-manual-04f1f9b/97.png)