ZyXEL U-336E User Manual - Page 79
Fax Reception from a BBS
View all ZyXEL U-336E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
• RTS is used to inform your modem that the computer cannot accept data at this moment. The modem will not pass received data to the DTE if RTS is turned off. When finished receiving the fax message, your modem will turn off CD then send a status report result code to the DTE. Fax Reception from a BBS The U-336E can automatically detect data and fax calls and allow BBS software to receive faxes on the same phone line. To allow your BBS to receive incoming faxes, make the following set-up changes in your BBS: 1. Add the string #B1+FCLASS=6 to the init string. Be sure the +FCLASS=6 command is the last command. 2. Change one of the messages in the list to CONNECT FAX. 3. Set the external mail string to ZyXEL and give it an error level. 4. In your BBS batch file, if the error level matches the external mail, execute rcvfax 2 /p:comport [/w:workpath] This setting will enable the BBS to receive a fax and store it automatically. The following is a sample setting for the FrontDoor system. • Add these commands to the init string: X7#B1+FCLASS=6 • Change the connection message to: 300 1200 1275 CONNECT 4800 CONNECT 1200 9600 CONNECT FAX 19200 CONNECT 4800 CONNECT 7200 CONNECT 9600 Fax Operation 67