ZyXEL U-336E User Manual - Page 60
Class 1 Command Set
View all ZyXEL U-336E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
ONOTE: formally approved version is the Class 2.0 command set, also called the TIA-592 standard. Class 1 Command Set Command Value Description +FCLASS=n Service class selection n=0 Set to Data mode n=1 Set to Class 1 mode n=2 Set to Class 2 mode n=2.0 Set to Class 2.0 mode n=6 Set to ZFAX mode n=8 Set to Voice mode IF S57.4=0 (DEFAULT), THE RESPONSE TO THE +FCLASS=? COMMAND WILL NOT REPORT CLASS 1 CAPABILITY. THIS IS DUE TO THE FACT THAT SOME FAX SOFTWARE PACKAGES MAY GET CONFUSED BY THIS RESPONSE. Command Value Description +FTS=n 0-255 Stop transmission and pause, in 10 ms units. +FRS=n 0-255 Wait for silence, in 10 ms units. +FTM= Transmit data with carrier. +FRM= Receive data with carrier. +FTH= Transmit HDLC data with carrier. +FRH= Receive HDLC data with carrier. The parameter for the preceding commands take the following values: Value Modulation Speed Requirements 3 V.21 ch. 2 300 required for FTH & FRH +FTH and +FRH support value 3 (V.21 ch. 2 / 300 bps) only. 24 V.27ter 2400 required for FTM & FRM 48 Fax Operation