ZyXEL U-336E User Manual - Page 67
Class 2.0 Command Set
View all ZyXEL U-336E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Response Value Function and Description response. +FNSS:"HEX string" Report the non-standard setup frame response. +FPOLL Remote polling indication. +FPTS:n Receive page transfer status response; refer to +FPTS=n command. +FTSI:"string" Report remote ID response TSI. +FVOICE Transition to Voice response. Class 2 Flow Control Flow control is necessary to match the DTE-DCE data rate to the line signaling rate while transmitting or receiving Group 3 (T.4) data. In Class 2 fax mode, both hardware (RTS/CTS) and software (XON/XOFF) flow control are enabled. Class 2.0 Command Set Command Syntax += +=? +? Description Execute a command or set a parameter. Read permissible settings. Read the current setting. Supported Commands Command Value Description +FAA=n Auto-answer mode parameter: n=0 DCE answers as set by +FCLASS. n=1 DCE answers and auto-determines call type. +FBO=n Phase C data bit order: n=0 Select direct bit order. n=1 Select reversed bit order in receiving mode for phase C data. +FBS? Buffer size parameter; read only. +FCC=vr,br,wd, DCE capability parameter. Refer to Fax Operation 55