2009 BMW 5 Series Owner's Manual - Page 177

5. Select "Store" and press the controller. 4. Select "Store" and press the controller. "Presets" is displayed. 6. Turn the controller until the desired memory position is selected. 7. Press the controller. The station is stored. 6. Press the controller. The station is stored. The stations of the last selection criterion are displayed once again after a short time. From radio readiness, the stations are stored for the remote control currently in use. Switching RDS on/off* 1. Select "FM" and press the controller. "Set" is selected. 2. Press the controller. Other menu items are displayed. 3. Select "RDS" and press the controller. About programmable memory buttons You can also store a station on the programmable memory buttons, also refer to page 22. 1. Select a station. 2. Press and hold desired button ... Changing a memory position 2. Select the desired station. "Set" is selected. 3. Press the controller. Other menu items are displayed. RDS is activated. The setting is stored for the remote control currently in use. Mobility 175 Online Edition for Part no. 01 41 2 600 721 - © 08/08 BMW AG 1. Select "Presets" and press the controller. Reference Communications Entertainment In the FM frequency range, additional information is transmitted via RDS. If the reception conditions are good, the station names are shown on the Control Display. If the reception is weak or disrupted, it can take some time before the station names are displayed. Navigation RDS Radio Data System Driving tips 5. Turn the controller until the desired memory position is selected. The number of the memory position appears beside the name or frequency of the station. Controls At a glance