2009 BMW 5 Series Owner's Manual - Page 236
2009 BMW 5 Series Manual
Page 236 highlights
Under the hood Engine oil The engine oil consumption is dependent on driving style and driving conditions. 6. Change to the second field from the top if necessary. Turn the controller until "Engine oil level" is selected and press the controller. The oil level is displayed. Checking engine oil level Your vehicle is equipped with an electronic oil level check. The condition for the most accurate indication of the oil level possible is measurement with the engine at operating temperature, i.e. following an uninterrupted drive of at least 6 miles/10 km. You can display the oil level on the Control Display while driving or when stopped on a level surface with the engine running. iDrive, for operating principle refer to page 16. 1. Press the button. This opens the start menu. 2. Press the controller to open the menu. 3. Turn the controller until "Info sources" is selected and press the controller. Possible messages > "Engine oil level O.K." > "No measurement available: Updating engine oil level measurement...": The engine oil level is measured. This process can take approx. 1 minute when stopped on a level surface with the engine running and approx. 5 minutes while driving. If the engine oil has been topped off, the measurement of the oil level can take up to 30 minutes. > "Oil level at the minimum! Refill with 1 quart of engine oil.": Add a maximum of 1 US quart/liter of engine oil at the next opportunity, refer also to Adding engine oil below. Add at least 0.5 US quart/liter of oil; otherwise, the oil level check cannot reliably display the new oil level. If the oil level displayed is below minimum, add engine oil immediately. Failure to do so may lead to engine damage. > "Engine oil level too high"*: Have the vehicle checked immediately, otherwise engine damage may result if too much oil has been added.< > "Please observe recalculated service interval for engine oil": Do not add engine oil. Before continuing to drive, note the recalculated remaining mileage until the next oil change service, refer to Service requirements on page 82. Have the system checked as soon as possible. 4. Turn the controller until "Service Info" is selected and press the controller. 5. Change to upper field if necessary. Turn the controller until "Service requirements" is selected and press the controller. 234 Online Edition for Part no. 01 41 2 600 721 - © 08/08 BMW AG